Ceramic wall tiles are highly attractive, particularly for places such as bathrooms, kitchens, and corridors, due to their versatility, waterproofing, and resistance to fading. Good care is required to maintain the beauty and useful function of ceramic wall tiles, allowing them to continue to contribute value to a space’s interior for many years.
Ways to Maintain Ceramic Wall Tiles
Routine Cleaning
The initial cleaning is the most important step in keeping ceramic wall tiles clean. Dust, filth, soap scum, and water deposits can build up on the tiles’ surface over time, giving them a dreary appearance. For cleaning ceramic wall tiles, use a low VOCs (volatile organic compounds) all-purpose cleaner that is safe for grout. Apply the cleaner to the floor tiles and wipe it with a soft cloth, sponge or cotton mop. Remember not to use harsh chemicals (acids, ammonia) that can permanently damage the glaze and grout.
Cleaning the tiles regularly will help to keep them clean and shining. Sweeping or vacuuming the floor before using any liquid cleaning helps to remove any loose dirt. This helps to avoid scratching the surface when cleaning. Tiles by Face-Impex, are also high moisture, stain and daily abrasion resistant.
Grout Maintenance
The grout between ceramic tiles can become stained or discoloured over time, which can affect the overall appearance of the installation. Regular grout cleaning is essential for maintaining its look. To clean grout, use a mild, non-abrasive cleaner. For stubborn stains, apply a grout cleaner to the tile in ceramic. Spray the cleaner on the grout lines and scrub with a soft brush or sponge.
Seal the grout with a penetrating sealer when installed to prevent it from fading or degrading. Reapply the sealer as needed, especially in high-traffic or wet areas.
Remove Stubborn Stains
Despite routine cleaning, some stains may penetrate the ceramic tiles or grout. For difficult stains, such as oil stains, soap scum stains, mildew stains, and stains caused by other substances, it is recommended to use one of the professional tile and grout cleaners. When choosing a cleaner for tile and grout, be sure it is safe and does not include harsh chemicals.
Apply the paste to the soiled area, let it sit for a few minutes, then scrub with a soft brush or sponge. After cleaning, wash the site with water and air dry the site to avoid residue accumulation.
Sealing and Wax Removal
If you use wax or sealer on ceramic wall tiles, they must be removed regularly to keep the surface in good condition. Use a tile sealer and adhesive remover to wipe or pry off the wax or sealer. First test the remover on a tiny spot and then be careful (do not damage the surface of the tile) because.
Coat the affected area with the remover, agitate for a few minutes, and scrub with a soft nylon pad. Wipe away any residue with a clean, damp cloth. Rinse well with water, to remove any remaining cleaning solution. Face-Impex suggests that the grout should be sealed with a penetrating/impregnating sealer after the completion of installation.
Preventing Mildew and Mold
Bathrooms and kitchens are areas that contain high amounts of moisture- mould and mildew often can occur in grout lines and corners. To avoid mildew and mould, ensure proper ventilation is provided in the room, using exhaust fans or opening the window.
When mould or mildew appears to be developing, clean the contaminated area as soon as possible using a mild bleach solution or a mould remover formulated for tile surfaces. It is very important to follow the manufacturer’s instructions to ensure safe use.
Handling Cracks or Chips
Although ceramic wall tiles are very strong, they may still suffer breakage or chipping with age, either in areas dense with traffic or because of “contact” with another object. If a tile is broken or chipped, it should be replaced immediately to avoid worsening the damage. To replace a chipped tile, first cut through the grout that surrounds it to remove the old tile, and replace it with a new tile of the same size and design.
When you want high-quality ceramic wall tiles, Face-Impex has a good variety to fulfil your design and function requirements.
Avoiding Common Mistakes
Some errors to avoid when caring for ceramic wall tiles:
Using Harsh Chemicals: Do not clean materials with acidic or abrasive cleaning agents, because it can affect both the tile glaze and the grout. Use mild pH-neutral cleaning products that are appropriate for ceramic.
- Neglecting Grout Sealing: Opened grout is at risk of becoming moist and dusty, and then it is discoloured. Apply a penetrating sealer to the grout after installation and as needed.
- Forgetting to Rinse: After cleaning, please rinse the tiles well to eliminate any remaining cleaner or residue. This prevents the formation and maintains a shiny appearance.
Final Thoughts
Ceramic wall tiles are a functional, chic, and strong choice for a variety of areas in your house. Whether you’re dealing with everyday dirt or stubborn stains, knowing how to care for your ceramic tiles is essential to keeping them in great shape. Face-Impex offers a wide range of ceramic wall tiles that are perfect for residential and commercial applications, giving you the ideal options to beautify your space. Using Face-Impex tiles, you are getting the robustness, style, and ease of maintenance in all installations.